Rural Lifestyle

Life in Rural America

Tag: boat trailer

Making a boat push pole

Boat push poleWhile on a recent river camping trip, my flat bottom aluminum boat high centered on a stump. My son and I were idling through a slough when we ran over a tree stump that was just below the surface. Usually this is no big deal. Everyone gets in the back of the boat, put the motor in reverse, rock the boat back and forth until the boat moves off the stump.

The problem is, when you have people standing up in the boat rocking back and forth, there is a chance that someone will fall out of the boat.

To hopefully eliminate the need to pile up in the back of the boat with the motor running, I am going to try and make a push pole out of 1 inch PVC pipe. Being made out of PVC, the pole will not be able to take a lot of stress. But on the plus side, the pole will be light and will not take up a lot of room in the boat.

This will be my first attempt at making a push pole, and to be quit honest, I do not know how its going to turn out.

Page 1 of 11
Kevin Felts © 2008 - 2018